Dell EMC VMAX Configuration And Best Practices Technical Notes Download Page 17 | Manualshive

Page: 17 / 82

background image

17

The validate operation on lcseb246_sg confirms that the devices and masking can be configured on the target array. The create
operation can now be run to create the migration sessions:

C:\>symdm create -src_sid 3184 -tgt_sid 0129 -sg lcseb246_sg -nop

A DM 'Create' operation is
in progress for storage group 'lcseb246_sg'. Please wait...

    Analyze Configuration..........................................Started.
      Source SID:000195703184
      Target SID:000197800129
    Analyze Configuration..........................................Done.
    Create Storage Group(s) on Target..............................Started.
    Create Storage Group(s) on Target..............................Done.
    Duplicate Device(s) on Target..................................Started.
    Duplicate Device(s) on Target..................................Done.
    Create Initiator Group(s) on Target............................Started
    Create Initiator Group(s) on Target............................Done.
    Create Port Group(s) on Target.................................Started.
    Create Port Group(s) on Target.................................Done.
    Setup Data Replication.........................................Started.
    Setup Data Replication.........................................In Progress.
    Setup Data Replication.........................................Done.
    Create Masking View(s) on Target...............................Started.
    Create Masking View(s) on Target...............................Done.
    Update Device State............................................Started.
    Update Device State............................................Done.

The DM 'Create' operation successfully executed for
storage group 'lcseb246_sg'.

«
...
15
16
17
18
19
...
»

Summary of Contents for VMAX



















































































Reviews:

No comments

Related manuals for VMAX

Brand: UniPOS Pages: 2

Brand: Eaton Pages: 32

Brand: Zenith Pages: 14

Brand: D3D Pages: 4

Brand: Xtrons Pages: 11

Brand: Indiana Line Pages: 12

PRESTIGE GR KENSINGTON GR-OW

Brand: Tannoy Pages: 38

Brand: Dantel Pages: 42

Brand: usi Pages: 10

Brand: iDataLink Pages: 9

Brand: GPX Pages: 16

Smartvest FUSG35000A

Brand: Abus Pages: 4

Brand: Turbosound Pages: 13

Brand: WAFER Pages: 11

Brand: Naxa Pages: 9

Brand: Serenity Pages: 3

Brand: Amina Pages: 8

Brand: Void Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands