manualshive.com logo in svg

Dell EMC VMAX, Configuration And Best Practices Technical Notes

Share
Download
Dell EMC VMAX Configuration And Best Practices Technical Notes Download Page 30

30 

 

 

Figure 5. 

Cutover 

 

C:\>symdm -sg lcseb246_sg cutover -sid 0129 -nop 
  
A DM 'Cutover' operation is 
in progress for storage group 'lcseb246_sg'. Please wait... 
  
    Analyze Configuration..........................................Started. 
      Source SID:000195703184 
      Target SID:000197800129 
    Analyze Configuration..........................................Done. 
    Cutover........................................................Started. 
    Cutover........................................................Done. 
  
The DM 'Cutover' operation successfully executed for 
storage group 'lcseb246_sg'. 

When the cutover operation completes, the data copy begins. The session is in a Migrating state and will remain in that state until either 
the pairs are cutover to the new array or other action is taken. The data movement can be monitored with symdm list using any of the 
options for displaying Storage Group, Masking View, Initiator Group, Port Group, and device pairs or run without any of the details: 

C:\>symdm -sid 0129 -sg lcseb246_sg list 
  
Symmetrix ID : 000197800129 
Storage Group: lcseb246_sg 
                                         Total 
Source       Target                      Capacity  Done 
Array        Array        State          (GB)      (%) 
------------ ------------ -------------- --------- ---- 
000195703184 000197800129 Migrating          200.0   67 

Summary of Contents for VMAX



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands