Dell EMC VMAX Configuration And Best Practices Technical Notes Download Page 1

Page: 1 / 82

NON-DISRUPTIVE MIGRATION : CONFIGURATION AND BEST PRACTICES TECHNICAL NOTES

VMAX NON-DISRUPTIVE MIGRATION

Configuration and Best Practices Technical Notes

ABSTRACT

Data migrations have always been challenging in an enterprise environment. The

complexity and size of very large storage environments makes planning for, scheduling,

and executing migrations extremely difficult. Migrations also often involve applications

that cannot be taken offline, even briefly for cutover to a new storage array. Dell

EMC’s

VMAX Non-Disruptive Migration, or NDM, allows customers to perform online data

migrations that are simple as well as completely non-disruptive to the host and

application.

May, 2017

Summary of Contents for VMAX



















































































Search results

Summary of Contents for VMAX

Reviews:

Related manuals for VMAX

Brands by name

Popular brands

Dell EMC VMAX, Configuration And Best Practices Technical Notes

Search results

Summary of Contents for VMAX

Reviews:

Related manuals for VMAX

Brands by name

Popular brands