Dell EMC Unity 300 Installation Manual Download Page 8

Page: 8 / 70

Before you begin

Procedure

1. Set up a product support account.

If you do not already have a product support account, go to

https://

support.emc.com/products/39949

to set one up. You will need a support

account to access the latest troubleshooting information, online chat,
installation and maintenance videos, utilities and wizards.

2. Complete the

Configuration Worksheet

The

Configuration Worksheet

is available for download from

https://

support.emc.com/products/39949

. Configuration worksheet information is also

included in

Configuration Worksheet

on page 67.

Installation workflow including optional DAEs

Use the following documents and software and sequence of actions as a guide to
install the storage system:

1. Use the

Quick Start Guide

or this guide and the

Unity Hardware Information Guide

to:

a. Prepare the site for installation.

b. Unpack the storage system.

c. Rack and install the storage system.

d. Cable the system components.

e. Power up the system components.

f. Use the Connection Utility (CU) to discover and configure the system

management IP address for network management.

g. Launch a browser, log in to the system, and follow the Unisphere Initial

Configuration Wizard tasks to complete the initial system configuration.

2. Use Unisphere to:

a. Complete the Initial Configuration Wizard tasks:

Accept License Agreement and Configure User Credentials

Install License File

Configure Network Services (DNS/NTP)

Configure FAST Cache and Pools (optional)

Configure Alerts (optional)

Configure Support Credentials, Customer Contact Information, and EMC
Secure Remote Services (recommended)

Configure iSCSI Interfaces (optional)

Set up a NAS Server (optional)

b. Enable SSH under Service

Service Tasks (recommended for remote

support)

Prepare your system

Unity 300/300F, Unity 350F, Unity 380/380F, Unity 400/400F, Unity 450F, Unity 500/500F, Unity 600/600F
and Unity 650F

Installation Guide

Summary of Contents for Unity 300







































































Search results

Summary of Contents for Unity 300

Reviews:

Related manuals for Unity 300

Brands by name

Popular brands

Dell EMC Unity 300, Installation Manual

Search results

Summary of Contents for Unity 300

Reviews:

Related manuals for Unity 300

Brands by name

Popular brands