Dell EMC Unity 300 Installation Manual Download Page 14

Page: 14 / 70

Unpack the disk processor enclosure

The disk processor enclosure (DPE) is a 2U component with either 12 3.5" drive slots
or 25 2.5" drive slots. Verify that you have received all of the DPE components,
including cables, bezel, rail kit, and mounting screws.

Verifying shipping package contents

Confirm that you received all necessary equipment needed to install the new 2U DPE.

Verify that you received the following:

Component

Disk processor enclosure (DPE)
- 2U component with either:

25 2.5" drive slots
or
12 3.5" drive slots

Front view 25 2.5" drive slots

Will Make the Array Unusable

Caution: Array Software on drives 0-3. Removing or relocating them

or
Front view 12 3.5" drive slots

SAS12Gb

Removing these drives will
make the array unusable

SPD

Removing these drives will
make the array unusable

SPD

Removing these drives will
make the array unusable

SPD

Removing these drives will
make the array unusable

SPD

Rail kit (1, includes 2 rails and 6
screws)

CL5583

Power cords

Unpack your system

Unity 300/300F, Unity 350F, Unity 380/380F, Unity 400/400F, Unity 450F, Unity 500/500F, Unity 600/600F
and Unity 650F

Installation Guide

Summary of Contents for Unity 300







































































Search results

Summary of Contents for Unity 300

Reviews:

Related manuals for Unity 300

Brands by name

Popular brands

Dell EMC Unity 300, Installation Manual

Search results

Summary of Contents for Unity 300

Reviews:

Related manuals for Unity 300

Brands by name

Popular brands