Figure 44. Removing a cabled drive
Next steps
1
Follow the procedure listed in
After working inside your system
.
2
Install the internal drive bay into the chassis.
3
If disconnected, reconnect the power and data cable(s) to the remaining drive(s) in the internal drive bay.
Installing a cabled drive
Prerequisites
1
Follow the safety guidelines listed in
2
Follow the procedure listed in
Before working inside your system
.
3
Remove the internal drive bay.
Steps
1
Insert the drive into the internal drive bay with the drive connector facing outward.
2
Secure the drive to the internal drive bay using the four screws.
NOTE:
When installing new drives into the internal drive bay, use the spare drive screws attached to the drive bay.
92
Installing and removing system components
