Figure 55. Installing a memory module
Next steps
1
2
Follow the procedure listed in
After working inside your system
.
3
To verify if the memory module has been installed properly, press F2 and navigate to
System Setup Main Menu > System BIOS >
Memory Settings
. In the
Memory Settings
screen, the System Memory Size must reflect the updated capacity of the installed
memory.
4
If the value is incorrect, one or more of the memory modules may not be installed properly. Ensure that the memory module is firmly
seated in the memory module socket.
5
Run the system memory test in system diagnostics.
Cooling fans
Removing the internal cooling fan
Prerequisites
CAUTION:
Never operate your system with the internal cooling fan removed. The system can overheat and result in shutdown of
the system and loss of data.
CAUTION:
Do not operate the system with the cover removed for a duration exceeding 5 minutes.
1
Follow the safety guidelines listed in
2
Follow the procedure listed in
Before working inside your system
.
3
.
Steps
1
Disconnect the internal cooling fan power cable from the system board.
2
Holding the internal cooling fan, press the release tab, and slide the cooling fan out in the direction of the arrow marked on the fan.
CAUTION:
Do not remove or install the internal cooling fan by holding the fan blades.
108
Installing and removing system components
