Initializing the TPM 2.0 for TXT users
1
While booting your system, press F2 to enter System Setup.
2
On the
System Setup Main Menu
screen, click
System BIOS
>
System Security Settings
.
3
From the
TPM Security
option, select
On
.
4
Save the settings.
5
Restart your system.
6
Enter
System Setup
again.
7
On the
System Setup Main Menu
screen, click
System BIOS
>
System Security Settings
.
8
Select the
TPM Advanced Settings
option.
9
From the
TPM2 Algorithm Selection
option, select
SHA256
, then go back to
System Security Settings
screen.
10 On the
System Security Settings
screen, from the
Intel TXT
option, select
On
.
11 Save the settings.
12 Restart your system.
Cable chain assembly
Removing cable chain assembly
Prerequisites
1
Follow the safety guidelines listed in
2
Power off the system and all attached peripherals.
3
Disconnect the system from the electrical outlet, and disconnect the peripherals.
4
, remove
5
Remove the
.
6
Remove the system from the rack and place it on an ESD work bench. For more information, see the Rail Installation Guide available at
.
7
.
8
If installed,
.
9
Remove the following:
a
Drive bay 1 backplane bracket.
b
Drive bay 2 backplane bracket.
c
d
e
If installed,
f
g
Memory modules for processor 1.
h
10
Disconnect all cables connected to the cable chain assembly from the backplanes and the system board.
Steps
1
Using a Phillips #1 screwdriver, remove all the screws securing the support bar and lift it away from the system.
2
Remove the screws connecting the cable chain and the bay 2 backplane bracket.
3
Remove the screws securing the cable chain top cover, and disengage it from the guiding pins and lift it away from the system.
Installing and removing system components
157
