c. Using Phillips #2 screwdriver, tighten the screws to secure the riser to the system.
Figure 99. Installing expansion card riser 2A
2. To install expansion card riser 2B or 2C:
a. Align the slot on the riser with the standoff on the system.
b. Lower the riser into the system until the riser card connector engages with the connector on the system board.
Figure 100. Installing expansion card riser 2
Next steps
1.
.
2. If removed,
install expansion cards into the riser
3. If applicable, open the PCIe card holder latch on the air shroud to install the full length card.
4. Follow the procedure listed in
After working inside your system
5. Install any device drivers required for the card as described in the documentation for the card.
152
Installing and removing system components
