Dell EMC PowerEdge R740xd, Installation And Service Manual, Page: 11 / 215

Table 2. Features available on the front of the 12 x 3.5 inch drive system (continued)
Item Panels and slots Icon Description
3 Right control panel N/A Contains the power button, VGA port, iDRAC Direct micro USB port
and two USB 2.0 ports.
4 Information tag N/A
The Information tag is a slide-out label panel that contains system
information such as Service Tag, NIC, MAC address, and so on. If
you have opted for the secure default access to iDRAC, the
Information tag also contains the iDRAC secure default password.
Left control panel view
Figure 4. Left control panel with optional iDRAC Quick Sync 2.0 indicator
Table 3. Left control panel
Item Indicator, button, or
connector
Icon Description
1 Status LED indicators N/A Indicate the status of the system. For more information, see the
Status LED indicators section.
2
System health and system
ID indicator Indicates the system health. For more information, see the System
health and system ID indicator codes section.
3
iDRAC Quick Sync 2
wireless indicator (optional) Indicates if the iDRAC Quick Sync 2 wireless option is activated. The
Quick Sync 2 feature allows management of the system using mobile
devices. This feature aggregates hardware/firmware inventory and
various system level diagnostic/error information that can be used in
troubleshooting the system. You can access system inventory, Dell
Lifecycle Controller logs or system logs, system health status, and
also configure iDRAC, BIOS, and networking parameters. You can
also launch the virtual Keyboard, Video, and Mouse (KVM) viewer
and virtual Kernel based Virtual Machine (KVM), on a supported
mobile device. For more information, see the Integrated Dell Remote
Access Controller User's Guide at
www.dell.com/
poweredgemanuals .
Status LED indicators
NOTE: The indicators display solid amber if any error occurs.
Table 4. Status LED indicators and descriptions
Icon Description Condition Corrective action
Drive
indicator The indicator turns solid amber if
there is a drive error.
• Check the System Event Log to determine if the drive has an error.
• Run the appropriate Online Diagnostics test. Restart the system and
run embedded diagnostics (ePSA).
PowerEdge R740xd system overview 11