Dell EMC PowerEdge R740xd, Installation And Service Manual

Page: 13 / 215

iDRAC Quick Sync 2 indicator codes
iDRAC Quick Sync 2 module (optional) is located on the left control panel of your system.
Figure 6. iDRAC Quick Sync 2 indicators
Table 6. iDRAC Quick Sync 2 indicators and descriptions
iDRAC Quick Sync 2 indicator
code
Condition Corrective action
Off (default state) Indicates that the iDRAC Quick Sync 2
feature is turned off. Press the iDRAC
Quick Sync 2 button to turn on the iDRAC
Quick Sync 2 feature.
If the LED fails to turn on, reseat the left control
panel flex cable and check. If the problem persists,
see
Getting help .
Solid white Indicates that iDRAC Quick Sync 2 is ready
to communicate. Press the iDRAC Quick
Sync 2 button to turn off. If the LED fails to turn off, restart the system. If the
problem persists, see
Getting help .
Blinks white rapidly Indicates data transfer activity.
If the indicator continues to blink indefinitely, see
Getting help .
Blinks white slowly Indicates that firmware update is in
progress.
If the indicator continues to blink indefinitely, see
Getting help .
Blinks white five times rapidly and
then turns off Indicates that the iDRAC Quick Sync 2
feature is disabled. Check if iDRAC Quick Sync 2 feature is configured to
be disabled by iDRAC. If the problem persists, see the
Getting help section. For more information, see
Integrated Dell Remote Access Controller User's
Guide
at www.dell.com/poweredgemanuals or Dell
OpenManage Server Administrator User’s Guide at
www.dell.com/openmanagemanuals > OpenManage
Server Administrator.
Solid amber Indicates that the system is in fail-safe
mode. Restart the system. If the problem persists, see
Getting help .
Blinking amber Indicates that the iDRAC Quick Sync 2
hardware is not responding properly. Restart the system. If the problem persists, see
Getting help .
Right control panel view
Figure 7. Right control panel view
PowerEdge R740xd system overview 13