Table 8. 2 X 2.5 inch drive system with 1 PCIe expansion slot
Item
Ports, panels, or slots
Icon
Description
1
Serial port
Use the serial port to connect a serial device to the system. For more
information about the supported serial port, see the
section.
2
iDRAC9 Enterprise port
Use the iDRAC9 dedicated network port to securely access the
embedded iDRAC on a separate management network, see the
Integrated Dell Remote Access Controller User's Guide at
Dell.com/
idracmanuals
.
3
Ethernet ports (2)
Use the Ethernet ports to connect Local Area Networks (LANs) to the
system. For more information about the supported Ethernet ports, see
the
section.
4
Full height riser slot
N/A
Use the card slots to connect full-height PCIe expansion cards on full
height riser.
5
Power supply unit (PSU)
N/A
For more information about the PSU configurations, see the
section.
6
LOM riser ports (2)
7
USB 3.0 port (2)
Use the USB 3.0 port to connect USB devices to the system. These
ports are 4-pin, USB 3.0-compliant.
8
VGA port
Use the VGA port to connect a display to the system. For more
information about the supported VGA port, see the
section.
9
CMA power port
N/A
The Cable Management Arm (CMA) power port enables you to connect
to the CMA.
10
System identification button
Press the system ID button:
•
To locate a particular system within a rack.
•
To turn the system ID on or off.
To reset iDRAC, press and hold the button for more than 15 seconds.
NOTE:
•
To reset iDRAC using system ID, ensure that the system ID
button is enabled in the iDRAC setup.
•
If the system stops responding during POST, press and hold
the system ID button (for more than five seconds) to enter the
BIOS progress mode.
11
Low profile riser right slot
N/A
Use the card slot to connect half-height PCIe expansion card on low
profile riser. For more information about the PSU configurations, see the
section.
12
Low profile riser left slot
13
Cabled PSU
N/A
Dell EMC PowerEdge R440 overview
15