Installing power interposer board
Prerequisite
Follow the safety guidelines listed in
Steps
1
Align the slots on the PIB with the guides on the system.
2
Using a Phillips #2 screwdriver, replace the two screws to secure the PIB to the system.
3
Route the cables and connect it to the system board.
Figure 98. Installing power interposer board
Next steps
1
2
3
Follow the procedure listed in
After working inside your system
.
Related links
Installing a power supply unit
Installing the air shroud
Control panel
A control panel allows you to manually control the inputs to the server.
Your system supports:
•
Left control panel: Contains status LEDs, system ID button, and iDRAC Quick Sync 2 (optional).
•
Right control panel: Contains power button, USB 2.0 port, micro USB for iDRAC Direct, and status LED for iDRAC Direct.
Removing the left control panel
Prerequisites
1
Follow the safety guidelines listed in
136
Installing and removing system components