Dell EMC Inspiron 3493 Service Manual Download

Page: 58 / 87

2. Remove the

3. Remove the

4. Remove the

5. Remove the

6. Remove the

NOTE:

The system board can be removed and installed together with the heat sink still attached.

7. Remove the

solid-state drive/Intel Optane

8. Remove the

9. Remove the

10. Remove the

11. Remove the

12. Remove the

13. Remove the

14. Remove the

15. Remove the

power button with fingerprint reader

(optional).

16. Remove the

power-adapter port

Procedure

After performing the above steps, we are left with the palm-rest and keyboard assembly.

Replacing the palm-rest and keyboard assembly

NOTE:

Before working inside your computer, read the safety information that shipped with your computer and follow

the steps in

Before working inside your computer

. After working inside your computer, follow the instructions in

After

working inside your computer

. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/regulatory_compliance

Removing and installing components

Summary of Contents for Inspiron 3493
























































































Search results

Summary of Contents for Inspiron 3493

Reviews:

Related manuals for Inspiron 3493

Brands by name

Popular brands

Dell EMC Inspiron 3493, Service Manual

Search results

Summary of Contents for Inspiron 3493

Reviews:

Related manuals for Inspiron 3493

Brands by name

Popular brands