Dell EMC Inspiron 3493 Service Manual Download

Page: 78 / 87

General-System Information

64-Bit Technology

Displays whether 64-bit technology is used.

Device Information

SATA-0

Displays the M.2 SATA SSD-0 device information of the computer.

SATA-1

Displays the M.2 SATA SSD-1 device information of the computer.

M.2 PCIe SSD-0

Displays the M.2 PCIe SSD-0 device information of the computer.

M.2 PCIe SSD-1

Displays the M.2 PCIe SSD-1 device information of the computer.

Video Controller

Displays the video controller type of the computer.

dGPU Video Controller

Displays the discrete graphics information of the computer.

Video BIOS Version

Displays the video BIOS version of the computer.

Video Memory

Displays the video memory information of the computer.

Panel Type

Displays the Panel Type of the computer.

Native Resolution

Displays the native resolution of the computer.

Audio Controller

Displays the audio controller information of the computer.

Wi-Fi Device

Displays the wireless device information of the computer.

Bluetooth Device

Displays the bluetooth device information of the computer.

Battery Information

Displays the battery health information.

Boot Sequence

Boot Sequence

Displays the boot sequence.

Boot List Option

Displays the available boot options.

Advanced Boot Options

Enable Legacy Option ROMs

Enable or disable the Legacy Option ROMs.

Enable UEFI Network Stack

Enable or disable the UEFI Network Stack.

Enable Attempt Legacy Boot

Enable or disable Legacy Boot.

UEFI Boot Path Security

Enable or disable the system to prompt the user to enter the Admin password when
booting a UEFI boot path from the F12 boot menu.

Date/Time

Displays the current date in MM/DD/YY format and current time in HH:MM:SS
AM/PM format.

Table 4. System setup options—System Configuration menu

System Configuration

SATA Operation

Configure operating mode of the integrated SATA hard drive controller.

Drives

Enable or disable various drives on board.

SMART Reporting

Enable or disable SMART Reporting during system startup.

USB Configuration

Enable Boot Support

Enable or disable booting from USB mass storage devices such as external hard
drive, optical drive, and USB drive.

Enable External USB Port

Enable or disable booting from USB mass storage devices connected to external USB
port.

Audio

Enable or disable the integrated audio controller.

Keyboard Illumination

Enables you to choose the operating mode of the keyboard illumination feature.

System setup

Summary of Contents for Inspiron 3493
























































































Search results

Summary of Contents for Inspiron 3493

Reviews:

Related manuals for Inspiron 3493

Brands by name

Popular brands

Dell EMC Inspiron 3493, Service Manual

Search results

Summary of Contents for Inspiron 3493

Reviews:

Related manuals for Inspiron 3493

Brands by name

Popular brands