Dell EMC Inspiron 3493 Service Manual Download

Page: 81 / 87

Table 9. System setup options—Virtualization Support menu

Virtualization Support

Virtualization

Specify whether a Virtual Machine Monitor (VMM) can utilize the additional hardware
capabilities provided by Intel Virtualization Technology.

VT for Direct I/O

Specify whether a Virtual Machine Monitor (VMM) can utilize the additional hardware
capabilities provided by Intel Virtualization Technology for Direct I/O.

Table 10. System setup options—Wireless menu

Wireless

Wireless Switch

Determine which wireless devices can be controlled by the Wireless Switch.

Wireless Device Enable

Enable or disable internal wireless devices.

Table 11. System setup options—Maintenance menu

Maintenance

Service Tag

Display the system’s Service Tag.

Asset Tag

Create a system Asset Tag.

BIOS Downgrade

Control flashing of the system firmware to previous revisions.

Data Wipe

Enable to securely erase data from all internal storage devices.

BIOS Recovery

Enable the user to recover from certain corrupted BIOS conditions from a recovery
file on the user primary hard drive or an external USB key.

First Power On Date

Disable the First Power On Date

Table 12. System setup options—System Logs menu

System Logs

BIOS Events

Display BIOS events.

Thermal Events

Display Thermal events.

Power Events

Display Power events.

Table 13. System setup options—SupportAssist System Resolution menu

SupportAssist System Resolution

Auto OS Recovery Threshold

Control the automatic boot flow for SupportAssist System Resolution Console and
for Dell OS Recovery tool.

SupportAssist OS Recovery

Enable or disable the boot flow for SupportAssist OS Recovery tool in the even of
certain system errors.

Clearing CMOS settings

CAUTION:

Clearing CMOS settings will reset the BIOS settings on your computer.

1. Remove the

base cover

2. Disconnect the battery cable from the system board.
3. Remove the

coin-cell battery

4. Wait for one minute.
5. Replace the

coin-cell battery

6. Connect the battery cable to the system board.
7. Replace the

base cover

System setup

Summary of Contents for Inspiron 3493
























































































Search results

Summary of Contents for Inspiron 3493

Reviews:

Related manuals for Inspiron 3493

Brands by name

Popular brands

Dell EMC Inspiron 3493, Service Manual

Search results

Summary of Contents for Inspiron 3493

Reviews:

Related manuals for Inspiron 3493

Brands by name

Popular brands