Dell EMC FS25 Field Replacement Unit Manual Download Page 48

Page: 48 / 50

2. Align the bezel with the enclosure.
3. Gently push the bezel into place on the cabinet until it latches.
4. If the bezel has a key lock, lock the bezel with the provided key.

Figure 41 Installing the bezel

CL5262

Closing the console

About this task

If you opened the console for access to the enclosure with the part you added or replaced, close
the console using the procedure that follows.

Procedure

1. Grasp the free side of the console, and swing the console to the right to close it

2. Gently push on the console until it is closed.

Verify the operation of the new disk drive

Procedure

1. Rescan all of the disks by entering the

disk rescan

command

Note:

This command does not generate any output. The amount of time it takes to

complete depends on how many disks are attached.

2. After the rescan completes, enter the

disk show state

command to verify the state of

all drives. This command checks that the drive is recognized.

# disk show state

Enclosure Disk

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

22 23 24 25

---------

-------------------------------------------------------------------------

1 . . . .

2 s

R . . . . . . . . . . . . . . . . . . . . . . .

---------

-------------------------------------------------------------------------

Replacing a 25-Slot Disk-Array Enclosure

Dell EMC FS25 SSD Shelf Guide Field Replacement Unit Guide

Summary of Contents for FS25



















































Search results

Summary of Contents for FS25

Reviews:

Related manuals for FS25

Brands by name

Popular brands

Dell EMC FS25, Field Replacement Unit Manual

Search results

Summary of Contents for FS25

Reviews:

Related manuals for FS25

Brands by name

Popular brands