Concepts Installation Manual
11
For customer service, call (800) 733-8829, (800) 773-8821, Fax (989) 773-3210, www.delfield.com
To mount decorative lamps:
Note: The connection post with (2) metallic tabs aligns with
the side of the track with the (2) copper strips
1. Pull down on the tab on the side of the lamp’s connection
box, push the connection post up into the track, then
rotate it 90 degrees until the connector locks into place.
2. If the light is mounted with the (2) metallic tabs toward
the side of the track with only (1) copper strip, the light
will not work. To correct this, simply pull down on the
tab on the side of the lamp’s connection box and twist it
90 degrees until it releases from the track. Then, rotate
it 180 degrees and mount back into the track using the
directions above.
To mount flexible spotlights:
Note: The side of the connection post with (2) metallic tabs
aligns with the side of the track with the (2) copper strips.
1. Pull down on the connection box collar, push the connection
post up into the track and then rotate it 90 degrees until it
locks into place.
2. If the light is mounted with the (2) metallic tabs toward
the side of the track with only (1) copper strip, the light
will not work. To correct this, simply pull down on the
connection box collar and twist it until it is released from
the track. Then, rotate it 180 degrees and mount back into
the track using the directions above.
3. To move the light, pull down on the connection box collar
and twist 90 degrees. Slide to the desired location and turn
back 90 degrees.
4. Turn switch ON.
5. Check for proper operation.
Signage Lighting Installation
Locate the metallic tabs and strips.
Decorative lamp installation steps.
Flexible spotlight installation steps.