V0505, 5.18
The 'load tools' procedure is different from the 'save tools' procedure. When you select 'load
tools' the control checks if the toolnumber already exists in the control. If not, then the tool is
automatically copied from disk to the control. If the toolnumber already exists then you have
three options:
-cancel (S3), the toolnumber is not loaded.
-overwrite (S4), the tool in the control is replaced by the tool from disk.
-rename (S5), the tool number of the tool on the disk is first renamed before it is loaded from
disk.
This means (in case of rename) that a new toolnumber is proposed. This new toolnumber is the
first free tool number in the tool library. Accept the proposed tool number with the enter key or
enter the number of another free tool number and press the enter key.
5.t
Note:
Tools are linked to the control by their machine number. When a 'restore' operation is started,
the control will only show those tools, which have the same machine number as the control.
If for any reason the machine number is changed, a new tool back-up operation should be exe-
cuted to save the control tools with their new machine number.
remove
subdir
Delete a subdirectory. If the subdirectory is not empty the
controller returns the message 'UNABLE TO REMOVE
DIRECTORY'.
Function keys:
