V0505, 5.16
5.5.
Saving/loading of tools
With the function key 'save to disk' (in any of the tool menus) the dialogue 'Save Punches' is
opened. From this menu, it is possible to save tools to a back-up location. This procedure
works the same for all tools and machine shapes and regardless of the back-up location (floppy
disk, network).
When the function key 'save to disk' has been pressed, a screen like shown below should
appear.
5.r
At the top of the screen, the back-up location is shown. If this location is not correct, you can
change the subdirectory with the softkey 'backup directory' or you should go to the program
constants menu, to change the device where tools are saved to. See the chapter about the pro-
gram constants.
To save a tool, enter its number from the list and press 'enter'.
Function keys:
all
Save all tools.
backup
directory
Change, make or remove a subdirectory where tools will
be saved.
