V0505, 3.2
•
Parameters explanation
Angle selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
m
α
Selection of the programming mode for the Y-axis.
0 = Y-axis bending position in absolute dimensions
1 = Y-axis in direct angle programming
Press the key to select the required setting.
Thickness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TH
Thickness of the plate in millimetres.
Material. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
M
Selection of one of the programmed materials, which are used to calculate the bending
depths. The control contains 4 preprogrammed materials. In total, 99 materials can be
programmed on the control. See the chapter about programming constants how to pro-
gram materials.
Press the key to select the required setting.
Blank length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
L
The required length of the original sheet from which the product is bent. If the program
After pressing the enter key the programmed value will
be placed at the corresponding parameter.
Function keys:
first Bend
The cursor jumps to the page with the first bend informa-
tion.
END
Finishing the data preparation and returning to the pro-
gram menu.
E-MODULE
(N/mm²)
TENSILE
STRENGTH
(N/mm²)
1 = Steel
2 = Aluminium
3 = Zinc
4 = Stainless steel
210.000
70.000
94.000
210.000
400
200
200
700
