background image

  Slow Juicer                          - 23

TROUBLE SHOOTING AND FAQ

• THE LID IS STUCK: 
-  Let the juicer work for thirty seconds after juicing to 

remove all the pulp. 

-  Too much pulp in the upper part can get the lid to be 

stuck. Then repeat 2-3 times the cycle ‘REVERSE’-

‘OFF’-‘FORWARD’ in this order.

-  Pour some water through the feeding shaft to rinse the 

inside. Then try to open the lid. 

• JUICE DRIPS OUT OF THE BASE: 
-  If the silicone tab at the bottom of the extraction bowl is 

not assembled correctly, the juice might drip out of the 

base. Make sure the silicone tab is correctly installed 

before assembling all parts. 

•   IS IT POSSIBLE TO JUICE INGREDIENTS WITH  

HARD FIBRES? 

-  Ingredients such as celery and ginger have long fibres 

which might get wrapped around the extraction screw 

and therefore affect the performance of the juicer. 

Don’t juice more than 450 grams of juice from fibrous 

ingredients. Completely clean the upper part after juicing 

this quantity of juice. 

• THE PLASTIC PARTS CHANGE COLOUR: 
-  Pulp residues can dry after juicing in the upper part if the 

juicer is not cleaned immediately. This might also affect 

the performance and the colour of the juicer. 

-  Ingredients that are rich in carotenoids, such as carrots 

and spinach, can affect the colour of the plastic of the 

parts. If the parts changed colour due to carotenoids, rub 

the coloured parts with vegetable oil and use detergent 

to clean the parts. 

 Vegetable oil can only be used to clean parts that 

changed colour. Never use vegetable oil on the 

extraction screw or the sieve. If vegetable oil or 

animal fat gets on the extraction screw or on the 

sieve, the performance of the juicer can be affected 

and these parts can be damaged. 

-  The silicone parts of the upper part can be removed to 

clean thoroughly. 

• USE FOR OTHER PURPOSES THAN JUICING: 
-  This appliance is developed to juice ingredients such as 

vegetables and fruit. 

-  Don’t use the juicer to juice vegetable oil from 

ingredients. 

-  Don’t use ingredients rich in vegetable oil or animal fat. 

-  If vegetable oil or animal fat gets on the extraction screw 

or on the sieve, the performance of the juicer can be 

affected and the parts can be damaged. 

Appliance 

 

Dejelin Slow Juicer

Model 

  SLJ100

Connection 

 

220-240 V, 50/60Hz

Power consumption 

240 W

TECHNICAL DATA

Summary of Contents for SLJ 100

























Reviews: