18 - Slow Juicer
DISASSEMBLING AND MAINTENANCE OF THE APPLIANCE
• Make sure the juicer removed all the pulp before
switching it OFF.
• Leave the juicer on for 30 seconds to make
cleaning easier.
• When the lid is jammed, repeat two to three times
the cycle REVERSE-OFF-FORWARD in this
order to detach the ingredients.
Then firmly push the lid down and turn it counter
clockwise to open.
Switch the appliance OFF
and unplug the appliance
Remove the extraction screw, the sieve and the
rotating scraper from the extraction bowl and clean
them with the supplied cleaning brush.
Hold the extraction bowl under running water and
remove the silicone tab to clean the pulp outlet.
TIP :
let the extraction bowl soak in warm water with a bit of soda
or a bit of bleach to remove excess of residue.
• Clean the juicer after each use. If the residues stay
in the juicer and dry, this might make cleaning
more difficult. The residues might also reduce the
performance of the juicer.
• Put the upper part in the sink and let some water
go through to make disassembling easier.
• Carefully dry the bottom of the extraction screw
(the part which is in contact with the metal
cylindrical shaft on the base).
Turn the lid counter clockwise to open it.
Place the extraction bowl on the base so that the
grey arrow aligns with the black arrow on the base.
Always hold the juicer by the base to move it.
Don’t lift the appliance by the feeding shaft.
To open the cover, turn it counterclockwise.
