12
Installation guide
DEiMiC ONE MASTER v1.8
2.2.3. CONNECTIONS INSIDE ELECTRICAL SWITCHGEAR (continued)
i) Heating distributors outgoing wires should be connected with valves, inside
hermetic boxes, led out with terminal
form an electrical switchgear side and
described according to documentation delivered by central heating installer
(room names assigned to the valves).
j) All terminals leading out to devices which are power supplied by voltage
lower than 230 V should be marked and different terminal colors should be
used.
2.2.4. MARKING
1. All wires should be permanently marked at both sides with a proper
distance, which ensure description visibility after removing wire isolation.
2. Terminals
and fuses should be numerated (marked).
3. Marks must not be duplicated.
4. Descriptions of terminals should be placed inside electrical switchgear.
5. If possible, please use marks from previous projects and figures which were
done to a building needs.
