Test set-up 1
input socket (red)
input socket (blue)
test cable
(black)
connection
power supply unit;
230 V AC/9 V DC
phone jack adapter
2.3 If the Test button is briefly pressed, measurement is started. Finally, the measurement
result is automatically saved in the display and the test voltage is switched off.
The results of all measurements for a protective module have to be the
lower limit
value (LLV [V])
and
£
the
upper limit value (ULV [V])
(see the relevant evaluation
table).
2.4 When measuring,
test procedure/commissioning
has to be observed (see
page 30).
Page
10
test cable (red)
BXT ML 4....
BCT MLC....
IN
OUT/protected
OUT/protected
IN
X
X
