D E H L E R 3 4
E N G I N E B A T T E R Y
The engine battery is used to start the engine and is located in the engine room.
B A T T E R Y M A I N S W I T C H
The engine battery switch is in the starboard aft cabin and the service battery switch is in the
navigation area.
M A I N T E N A N C E
The AGM batteries require low maintenance and should be well charged at all times. Please
check this regularly.
In the winter season it is necessary to store the well-charged batteries in a dry and frost-free
place. Take care that the poles are clean and protected against corrosion with pole grease.
1.5.2.
Alternating current system
The 230 V installation on board is supplied with current via the shore connection or the batteries
via an inverter (option).
In case there is no shore connection at your disposal, you should use the 230 V devices via the
inverter in a very energy-conscious way, because the capacity of the batteries is limited. You may
have to start the engine to recharge the consumer batteries. Therefore: Use the 220 Volt system
when connected to shore power.
The current is distributed via the switchboard in the saloon. The circuits are provided with
switches so that the consumers can be switched from a central location. Fuses protect all
electrical circuits within the system against overload. The fuses indicate whether there is a failure
in the system. If required, your dealer can provide the circuit diagram.
standard AC-panel
option AC-panel with inverter
Summary of Contents for 34
