Dehler 34, Owners & Safety Manual

Page: 70 / 94

D E H L E R 3 4
Do not modify the craft’s LPG system. Installation, alterations and
maintenance shall be performed by a competent person. Have
the system inspected at regular intervals or as required by
national requirements.
The cylinder box is ventilated outboard. Possible water that has penetrated is drained through
the opening.
Keep the ventilation opening free of blockages. Check regularly
the state of the opening!
1.10.2. Replacement of the gas cylinder
Replace the gas cylinder as follows:
•
First, switch off all gas consumers.
•
Switch off the engine.
Never smoke or use open fire whilst replacing the cylinder.
•
Shut-off the valve at the cylinder.
•
Remove the pressure regulator at the valve of the cylinder. Only use appropriate tools so that
you don’t damage the connection and the fitting.
•
Detach the empty cylinder from the mounting and take the cylinder from the cylinder box.
•
Insert the new cylinder in the mounting.
•
Fasten the mounting to the cylinder.
•
Check if the connector thread at the cylinder is damaged.
Cylinders with damaged threads may not be used. There is a
danger of leaking gas.
•
Carefully place the union nut and screw it hand-tight.
•
Screw the union nut tight with an appropriate tool.
•
Check whether the connection is tight.
Never use grease at the cylinder connection or the valves.