
Page 13
Anti-Tilt mechanism
•
“A”
1 x Stability chain
•
“B”
1 x Stability hook with
anchor sleeve
•
“A”
is factory fitted at the rear
of the stove in the centre. (See
overleaf for instructions if the
removable splashback is to be
fitted)
•
Position the stove and move
“A”
to touch the wall behind
the stove.
•
Mark the hole where
“A”
touches the wall behind the
stove.
•
Move the stove away from the
wall to allow for an area to work
in.
•
Using a 8.0 mm concrete bit,
drill a hole at the marked
position.
•
Using the Stability hook and
anchor sleeve
“B”
, firmly
secure
“B”
to the wall.
•
Slide the stove back in position
and engage the stability chain
“A”
onto stability hook
“B”
.
•
The stove is then secured and
will not accidentally tilt if
downward pressure is applied
to the open oven door.
WARNING:
in order to
prevent tipping of the
appliance, this stabilizing
means must be installed.
Refer to the instruction for
installation.
Figures in this manual
are schematic and may
not match your stove
exactly.