ZEN-LOG-MAN-16V03 (0930)
Copyright © 2016 Define Instruments
3
ORDER CODES
Supply Voltage
HV
MV
85–265V AC / 95–370V DC
24–48V AC / 17–72V DC
Port 1 Comm
RS
EMOD
RS422/485
Ethernet Modbus
Zen Datalogger
Supply Voltage
ZEN–LOG
–
–
Port 1 Comm
SAFETY NOTICES
For your safety and the prevention of damage to the Zen unit and other equipment
connected to it,
please read complete instructions prior to installation and op-
eration of the Zen and carefully observe all safety regulations and instructions
.
Consult this manual carefully in all cases where hazard symbols are marked on
your Zen unit.
Use of this instrument in a manner not specified by the manufacturer may compro-
mise the protection provided by the instrument. This instrument should not be used
to directly drive valves, motors, or other actuators, unless equipped with appropri-
ate safeguards.
It is the responsibility of the user to identify potential hazards that may arise in
the event of a fault to unit, and implement safeguards for the prevention of harm
to persons or equipment. The safety of any system incorporating this unit is the
responsibility of the assembler of the system.
Symbol definitions
CAUTION
Risk of electric shock
Please refer to user manual.
Both direct and alternating current.
CAUTION
Risk of danger
Please refer to user manual.
Equipment protected throughout by
DOUBLE INSULATION or REINFORCED
INSULATION.
