ZEN-LOG-MAN-16V03 (0930)
Copyright © 2016 Define Instruments
13
4.3 - Main navigation
Overview
View basic device information including Se-
rial Number and firmware version. Password
Protect your device, export a configuration
certificate and save/upload a configuration
file.
Ports
This tab is only visible if you are connected to
your Zen via the USB Programming Port. It
enables you to configure a range of settings
for Port 1 and Port 2 (baud rate, parity, Tx
delay etc.).
Once your ports are set up, you will be able
to configure to your Zen in WorkBench via
Port 1 or Port 2 instead of the USB program-
ming port - perfect for adjusting settings
once your unit is installed.
Inputs
Set up and scale the 16 isolated input chan-
nels. Includes integrated wiring diagrams
and examples.
Digital Inputs
Set up the four digital inputs and view their
live status.
Totalizers
Configure up to 10 totalizers using either an
input channel or a digital input as the source.
Retransmission
Configure up the two analog outputs to
operate independently, or in cooperation
with the digital inputs as an intelligent
multiplexer.
Setpoints
Configure up to 16 setpoints which can be
activated by an input, a digital input or a
totalizer. Configure alarms or control func-
tions by selecting from a variety of pre-pro-
grammed modes, complete with detailed
explanations.
Relays
Configure the two relay outputs. These may
be driven from one or more setpoints, or di-
rectly from one of the digital input pins.
Logging
Configure your data logging options. Select
the logging interval, set the time, and select
which channels will be logged. (See Section
5 for more on Data Logging.)
Data Viewer
View and analyze your live data and down-
load it to your computer. (See Section 5 for
more on Data Logging.)
Plugins
Plugins are small programs which are loaded
into the Zen to expand its functionality or
simplify its use. Plugins are optional and in
many cases they may not be needed. Note
that only one plugin can be installed on your
Zen at a time.
