8
Installation (continued)
7
Caulking around the light
fixture
Ƒ
Caulk around the mounting plate (D) and
mounting surface with silicone sealant (not
included).
Operation
1
Adjusting the lamp heads
WARNING:
Risk of fire. Keep the lamp heads at least
2 in. (51 mm) from combustible materials.
CAUTION:
Keep lamp heads 30° below horizontal to
avoid water damage and electrical shock.
Ƒ
Turn the power on at the circuit breaker or fuse
and turn on the wall switch.
Ƒ
If needed, gently grasp the lamp heads (A) and
tilt them up or down or side to side to adjust
the light coverage area.
180°
THIS SIDE UP
2
Rotating the sensor controls
downward
Ƒ
Rotate the motion sensor (C) so the text faces
upward.
180°
THIS SIDE UP
D
C
A
