12
Operation (continued)
13
Adding multiple users
The Notifi system allows control of multiple users
within an account.
Tap
> Advanced Settings > Manage Multiple Users.
Ƒ
Tap the “Add Viewers” button and type the
email address in the “To:” field.
Ƒ
Tap the “Send” button.
NOTE:
When adding multiple users, separate the email
addresses with a semicolon.
14
Adding system name and
photo
Add a name and photo to represent the Notifi system
on the mobile device. The photo will be placed inside
the blue circle icon next to the selected Notifi system.
Tap
> Advanced Settings > System Name/Photo.
Ƒ
Enter a name for the Notifi system.
Ƒ
Select an existing photo and take a new photo
to represent the Notifi system.
NOTE:
The light settings and name are stored in the light
fixture. The photo is locally stored on the mobile device and
is only visible on that device.
15
Using manual mode
Manual mode overrides the motion sensor (C) and will
turn the light on at the preset “Full Bright Intensity”
level. This feature works day or night. The motion sensor
(C) will reset to motion sensing mode at sunrise.
Ƒ
On the main screen under the “Systems” tab,
choose “ON”, “OFF”, or “AUTO” to control the
lights for the selected Notifi system.
16
Deleting a Notifi system
To delete a Notifi system from an account:
Ƒ
Turn off the wall switch controlling the Notifi
system.
Ƒ
On the main “Systems” screen, wait for the
system to go offline (the system name and
image will turn gray).
Ƒ
Once offline, swipe the Notifi system to be
deleted to the left and tap the trashcan icon
(
).
Care and Cleaning
Ƒ
To prolong the original appearance, clean the light fixture with clear water and a soft, damp cloth only.
Ƒ
Do not use paints, solvents, or other chemicals on this light fixture. They could cause a premature
deterioration of the finish. This is not a defect in the finish and will not be covered by the warranty.
Ƒ
Do not spray the light fixture with a hose or power washer.
Ƒ
To clean the camera lens, use a dry, microfiber cloth only.
