Printed 7/2/2016
MV Lioness Owners Notes v2015.2
Page 16 of 36
3.
Step on the windlass switch to retrieve the anchor.
4.
Wash the chain with plenty of water (hose fitting on deck) as it is
retrieved.
5.
As the chain tightens stop the windlass and wait until the boat
catches up then continue raising the anchor.
6.
When the anchor is clear of the water make sure it is clean of mud.
A boat brush and hose may be needed to assist this.
7.
Be careful for the last couple feet to make sure the anchor is facing
the proper direction. This is important, as this is a very large anchor
and you don’t want to ding the fiberglass by pulling it tight in the
wring position.
Other
1.
Spare anchors and rope are located in the lazarette.
2.
A polypropylene line is on a reel located in the lazarette. Use this for
a stern line to shore, if needed.
