Dedicated Micros CamVu 2000 Installation And Operation Manual Download Page 89

Page: 89 / 112

CamV

u 2000

Draft

Debug Parser

This menu allow detailed analysis of the debug output from the camera and maybe used to assist with fault

finding. The debug can be filtered in order to isolate and highlight events that are of interest.

View

Defines whether the debug settings on the debug output will

be displayed.

Filter

Specifiies which of the Debug Filters is being configured.

Search text

Specifies the text to be searched for in the Debug stream.

Text colour

Allows configuration of the parser window font colour.

Background colour

Allows configuration of the parser window background.

Font family

Allows the display font family to be specified.

Font size

Allows the display font size to be specified.

Font weight

Allows the display font weight to be specified.

Refresh (Purple)

Refreshes the current page

Summary of Contents for CamVu 2000

















































































































Search results

Summary of Contents for CamVu 2000

Reviews:

Related manuals for CamVu 2000

Brands by name

Popular brands

Dedicated Micros CamVu 2000, Installation And Operation Manual

Search results

Summary of Contents for CamVu 2000

Reviews:

Related manuals for CamVu 2000

Brands by name

Popular brands