Instruction Manual
Negative Pressure Unit green dec
Version 1
Page 4
The copyright of this instruction manual remains with
deconta.
This manual is intended for assembly,
operation and maintenance personnel. It contains instructions and drafts of technical nature which may
neither be distributed nor used in any unauthorised way for competitive purposes or passed on to others.
1. Basic safety advice
Dealing with the device technology is only permitted for trained competent personnel.
Exact knowledge of the manual is a necessary requirement for the staff when handling the
device.
The operating instructions should always be kept in the immediate vicinity, accessible to
all persons.
deconta
must oblige you, as operator of the device, to follow the operating instructions
and to use the device technology only as intended and not in an inappropriate manner! In
case of non-compliance,
deconta
assumes no liability.
To ensure safety during operation of the device, please strictly observe the following:
• Do not use in potentially explosive atmospheres.
• Maintenance, including removal and replacement of the filters, should only be
carried out authorized personnel wearing appropriate protective clothing.
• For all repair and maintenance work, the unit must be completely disconnected from the
power supply.
• The safety and protective equipment must be in perfect working order.
• Safety instructions affixed to the device are to be left in readable condition and to be
followed.
• General, legal and other binding regulations and procedures for accident prevention
and handling of hazardous substances must be observed.
To ensure safety, modifications to the device are not permitted.
To avoid damage, never operate the unit without built-in filters.
ATTENTION!
The negative pressure units are not suitable for use in condensing, corrosive,
flammable and explosive atmospheres.
We explicitly refer to the additional regional and national safety measures and
regulations when operating the device technology.
The operator must carry out the inspection of the exhaust air at initial acceptance as well
as at least a 3-year interval.
In addition to the instruction manual, general, legal and other binding regulations on
accident prevention and environmental protection must be observed.
