GHD
TM
& SCOUT
TM
USER’S MANUAL
29
•
Make sure the
(dir)
setting is set to
t A
(both toward and
away) during the tuning fork test. If it is not set to
t A
the
system may not detect the fork’s frequency.
•
Make sure the sensitivity
(SEN)
is set between 2 and 6 while
performing the tuning fork test. A setting of 1 will not allow a
proper tuning fork test to occur.
•
A tuning fork does not generate a directional signal. Ignore
the directional indicator when performing the tuning fork test.
9. Care, Cleaning, and Storage
• Avoid spilling food, beverages and other liquids on the radar device.
• When you are not using or transporting the device, store it in its original
packaging.
• To clean the radar device, dust it with a soft clean cloth, which is free of
cleaning solutions.
10. Specifications
10.1 Antenna Parameters
K-Band
IACP
Type III
Nominal transmission frequency
24.150 GHz
Nominal horizontal beamwidth
12°
Polarization
Linear
(Vertical)
Nominal microwave power output 7 mW
Maximum aperture power density
<
1 mW/cm
2
10.2 Environment
Ambient operating temperatures
-22ºF to +158ºF
(-30ºC to +70ºC)
Maximum humidity
90% relative humidity
(non-condensing) at
98.6°F (37°C)
