GHD
TM
& SCOUT
TM
USER’S MANUAL
15
4.3 Trigger
The radar transmits and receives microwave energy when you pull
the trigger. To measure the speeds of target vehicles, pull and hold
the trigger. When you want to lock a speed, release the trigger then
quickly pull it again (within 1/2 second). The radar will take the
speed in the left display when the trigger is released, move it to
the right display, and lock it in. The right display will then flash
alternately between the locked speed and a directional indicator (
t
means the target vehicle is moving toward you, and
A
means it is
moving away from you). As long as you continue to hold the trigger,
the radar will continue to track targets and display their speeds in the
left display. The locked speed clears when you pull the trigger again.
4.4 Mounting Configurations
The radar is designed for hand-held operation. Optionally, you can
mount it to a standard camera tripod.
5. Operating Modes
The
MENU
and
SEL
buttons on the GHD & SCOUT control panels let you
review and change programmable settings. The radar gun will remember
the settings you last set when it is turned off and will power up with them.
5.1 Menu
You can use the factory default settings listed on the next page or
you can select your own settings. To select a setting, repeatedly press
the
MENU
button until the setting you want to change appears. Then
press the select
(SEL)
button to advance through the selections for
that setting. When you have made your selection, release the buttons
and your new settings will be in effect. If neither
MENU
or
SEL
is
pressed after 2 seconds, the radar gun will return to normal operating
mode, capturing whatever settings you have selected to that point.