Decatur Electronics G3, User Manual & Installation Manual, Page: 47 / 76

G
3
™
U
se
r’s
&
In
sta
lla
tio
n M
an
ua
l
7/October/2020
47
(e) COM serial setting
Selects serial output protocol . Press the front or rear antenna button
to toggle between the selections . (See appendix A for full list of
communication formats)
Figure 6.1f
The G3™ front display showing serial communication
protocol selection display .
(f) HARMONIC setting
Selects harmonic display in the target window . Target window will
display “_H_” during a patrol harmonic event (display will normally be
blank if this setting is OFF) . Press the front or rear antenna button to
toggle between OFF (default) and ON .
Figure 6.1g
The G3™ front display showing harmonic display option .
(g) VIP – AUTO or MANUAL setting
AUTO for Automatic switching between Stationary and Moving
mode . Man for Manual switching of modes .
Figure 6.1h
The G3™ front display showing menu selection of VIP MANual
or AUTOmatic mode switching .