G
3
™
U
se
r’s
&
In
sta
lla
tio
n M
an
ua
l
7/October/2020
13
Pull the display from the computer and note the 9-pin connectors on
each half of the unit . Screw two standoffs (included with the display
separation kit) into the holes next to each connector on the display
unit . These standoffs are used to attach the two pieces with the
9-pin connector cable .
Figure 2.1c
To connect the separated unit, first insert the
standoffs to secure the cable connectors .
Then attach and secure the connectors with the thumbscrews on the
sides of each cable connector .
Figure 2.1d
Secure the connecting cable by tightening the
thumbscrews into the standoffs .
To return the unit to a one-piece configuration, remove the cables
and standoffs, line up the 9-pin connectors, push the two pieces
together and secure with the two retaining screws .
Summary of Contents for G3
