Decatur Electronics G3, User Manual & Installation Manual, Page: 34 / 76

G
3
™
U
se
r’s
&
In
sta
lla
tio
n M
an
ua
l
7/October/2020
34
3.8 Range Setting
You can adjust the range (sensitivity) of the G3™ in each of the three
operating modes independently:
• Moving Opposite Mode
• Moving Same Lane Mode
• Stationary Modes
The G3™ can track the speed of targets that exceed 914 meters when
the unit is set at maximum range . The range setting is available in
the main menu location . To change the range setting for a mode,
press the MENU button on the IR remote . Radar will display:
Figure 3.8a
The G3™ front display showing range or sensitivity setting .
Press the FRONT antenna (+) or REAR antenna (-) to increase
or decrease the range setting . The range value on the far right
PATROL display will change . The maximum range setting is 5 while
the minimum is 1 . Initially, you will want to start with minimum
range, then increase the range setting until you obtain a desired
performance level . For example, an operator would use reduced
range when operating within a city environment . Pressing the MENU
button again will exit the main menu and save the range setting . The
range setting for each operating mode will be permanently saved
when the radar is powered off .