Decatur Electronics G3, User Manual & Installation Manual, Page: 16 / 76

G
3
™
U
se
r’s
&
In
sta
lla
tio
n M
an
ua
l
7/October/2020
16
Antenna connector
The antennas are connected to the computer unit with a CAT 7
shielded Ethernet cable . Either end of the cable can be used to
connect to the antenna or computer unit .
Figure 2.2c
Cable connector that plugs into the antenna .or computer unit
To attach an antenna cable:
1 . Align the antenna cable Ethernet connector with the receptacle .
2 . Push the connector into the receptacle until you hear a click .
3 . To remove the connector, press down on the top cable plug latch
and pull apart .
Figure 2.2d
Align the latch on the top of the Ethernet plug with
the notch on the computer Ethernet receptacle .
WARNINGS
• Only use factory authorized antenna cables.
Substitution of non-authorized cables can affect the
operation of the G3™