DEC LA30N, User Manual

Page: 86 / 193

4-30
Using Set-Up Mode
Changing Menu Access Options
You can restrict the access to the Set-Up functions to avoid accidentally changing the Set-Up
options.
MENU ACCESS Option and Values
• Overprinted values are the factory settings.
MENU ACCESS
Option Values Description
<MENU-ACCES>
Specify the type of access to the Set-Up functions
from the control panel or from the
<FUNCTIONS>
menu.
ALL FUNC All functions are accessible.
MACRO ONLY
Only
MACRO 1
and
MACRO 2
functions are
accessible from the
<FUNCTIONS>
menu.
NO ACCESS
Set-Up mode is inaccessible.
NO PANEL Font
,
Macro
, and
Protocol
buttons are disabled even in
Normal mode. Set-Up mode is also inaccessible.
Note:
You can return to the All Functions Accessible
mode by turning the printer on while pressing the
Park
,
LF and FF/Load buttons at the same time.
The printer enters the Set-Up mode with this
operation.
Exiting and Saving
This section describes how to exit the set up mode while saving any changes you have made.
To exit the Set-Up mode with the settings saved, select the
SAVE&EXIT
function and press
the button or the button.
Any settings changed while in the Set-Up mode are saved as the new power-on defaults for
the printer. The new defaults remain active until you change them again.
Caution: To temporarily use your changes, press the
Set-Up/Quit
button. These changes
are lost at the next power-off.
#04 Chapter 4 24/05/96, 10:31 30