manualshive.com logo in svg

DEC LA30N, User Manual

Share
Download
DEC LA30N User Manual Download Page 15

2-1

Paper Handling

2

Paper Handling

This chapter explains how your printer uses paper.  Topics covered are:

•

Getting to know the printer’s major parts and the control panel

•

Selecting paper

•

Overview of paper operations

•

Adjusting for paper thickness

•

Using single sheets

•

Using continuous forms (push-tractor feed and pull-tractor feed)

•

Feeding and positioning paper

•

Switching paper types

Tips for paper handling are given at the end of this chapter.  Check that section if you are
using multipart forms, envelopes, or labels.

Getting to Know the Printer’s Major Parts and the Control Panel

This section describes the major parts and controls of the printer and operations of the
control panel.  Take a moment to become familiar with the printer.

#02 Chapter 2

23/05/96, 14:15

1

Summary of Contents for LA30N


































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands