Product Specifications
Voltage
24 VDC
Power Max.
40 W
Operating Temperature
5° / 50° C (40° / 120°F)
Protection Class
IP54
Clean Room
100
Clean Room with Scavenge Port*
10
*Contact Tech Support.
Maintenance Specifications
Field Repairable
Yes
Application Restrictions
• Timing, power and load beyond specifications
• Suitable for external gripping only
Technical Specifications:
Gripper can be mounted and operated in any orientation
Mounting Information:
G
• Electrically Actuated
24 VDC, 4-wire input: power, ground, open & closed signals.
100% duty cycle for high throughput.
• “Light Switch” Simplicity
Plug and play. No programming, tuning or adjusting required.
As easy as a pneumatic gripper to control and operate.
• Energy Efficient
Only 3W required. Can be driven directly by most PLC’s
without a separate power supply. Can be battery driven
for remote applications.
• High Cycle Life
20+ million cycles with zero maintenance!
High reliability eliminates down time.
Lowest cost of ownership of any gripper,
pneumatic or electric.
• Built-in Electronics
All electronics are sealed
within the gripper. No external
control board needed.
4-pin/wire control cable
sold separately.
• Long Stroke, Fast Actuation
25mm stroke for picking multiple sized parts.
Full actuation in 0.25 second. Pick up to 150
parts per minute (with reduced stroke).
• Failsafe operation
In case of a power loss, the jaws will not
separate but grip force will be diminished.
Finger design should include features other
than just friction to retain part for critical
applications.
DPE Parallel Gripper-
Electric Gripper Series
Patent Pending.
Please see back cover for DE-STA-CO Global Locations. www.destaco.com
Body mounts with screws
and locates with slip fit
dowel pins for accuracy
Fingers attach to jaws
with screws and locate
with dowel pins
TM
1.8
DPE SERIES
1_8-1_13 DPE_(ENG_A4)_Layout 1 09.05.11 14:33 Seite 8
