3
EN
COMPONENTS
1
2
3
1
Spatula
2
Spatula cable connector
3
Spatula flexible cable
CONTROL PANEL
1
2 3 4 5 6
7
8
9
10
11
12
13
14
15
1
Power On indicator
2
On / off button
3
Wave type selection button
4
Run indicator
5
Start / Stop button
6
Pause indicator
7
Continuous wave indicator
8
Discontinuous wave indicator
9
Pulse wave indicator
10
Power display
11
Decrease power button
12
Increase power button
13
Increase time button
14
Decrease time button
15
Timer
REAR PANEL
1
2 3
4
1
Spatula cable connector
2
Power supply switch
3
Electrical power supply connector
4
Fuse
CONNECTION INSTRUCTIONS
●
Connect the power cable to the rear panel of the
main body.
●
Connect the flexible cable from the spatula to the
corresponding connection on the rear panel.
POWER AND CONFIGURATION
●
Turn on the power switch on the rear of the
machine and press
on the control panel.
The power indicator
will light up. The machine
will be in standby mode and ready for operation. On
the control panel:
-
The timer will show 15 minutes.
-
The power indicator will show 1.
-
The continuous wave indicator
will light up.
-
On the
button, the pause indicator
will light up.
●
Set the timer using the
or
buttons
to choose the operating time of the machine, in a
range of between 1 and 30 minutes.
●
Set the power using the
or
buttons
to choose the power of the machine, in a range of
between 1 and 9.
●
Wave type selection: use the
button to select
the type of wave.
-
When the
indicator lights up, the type of
wave selected is continuous.
-
When the
indicator lights up, the type of
wave selected is discontinuous.
-
When the
indicator lights up, the type of
wave selected is pulse.
●
Use the
button to start or stop the
device.