- 3 -
Space Requirements
Sufficient floor space is also required for the laser system. The suggested minimum room
size is 10 x 10 feet (3 x 3 meters). Allow 24 inches (61 cm) of clearance on all sides of
the machine so that the air vents will not be obstructed.
The POLYLASE LP Laser is moved easily from room to room. Make sure that adequate
space and appropriate electrical hookups are available in each room where its use is
anticipated. If the system is moved, care must be taken to ensure that the optical fiber
cables and laser handpieces are not damaged.
Footswitch Connection
Check to see that the footswitch cable is firmly connected to the footswitch receptacle
input on the back of the laser unit.
Figure 4-1. Footswitch connection.
Foot switch connector
