DCT e-track, User Manual

Page: 201 / 212

4.23. UNIT’S TAIP REFERENCE
Continued from the previous page.
ID Description
48 Invalid event index when using the
XATM
message. See the
XATM
message.
49 Invalid
XATM
message format. See the
XATM
message.
50 Invalid reset option. See the
RT
message.
51 Can not modify a DP using the TAIP console from the same DP.
52 Can not use
0000
as locking code. See the
XALL
message.
59 Invalid parameter range/value.
60 IP-type destination supplied with no port. See the
XADP
message.
61 Telephone-type destination supplied can not include port parameter. See the
XADP
message.
62 Functionality not available on this product.
63 Can not initiate a new voice call: There is a voice call being held.
64 Can not initiate voice call: The selected Destination is not defined.
65 No current voice call to end.
68 Exceeded the allowed length for this command.
69 Firmware upgrade over the air is not enabled on this module.
76 Invalid counter operation. See the
GC
message.
77 Invalid Counter recycle flag. See the
GC
message.
78 Counter Threshold or Value parameter required. See the
GC
message.
79 Counter command not valid for the actual recycle flag. See the
GC
message.
81 Unrecognized Set message.
82 Wrong region index. See the
GR
message.
83 No space available for cells format.
84 At least one subscribed cell, can not format.
85 Found illegal characters on a Destination Point definition. See the
XADP
message.
88 Wrong point index. See the
GR
message.
90 Unavailable feature.
96 Internal flash memory error. Can not save on flash.
99 GPS data temporarily unavailable. If this situation persists for more than 30 seconds you may have a
hardware problem. It is normal to get this error when a GPS request is issued too soon after power-up.
199