4.23. UNIT’S TAIP REFERENCE
Examples
Single signal triggers
To define event 05 to send an EV
Event Message
every 3 minutes:
Example:
Periodic report
1. Use the TD message to configure a
Time & Distance
signal to
trigger every 3 minutes:
>
STD70180
<
2. Define the event with signal TD7 as trigger:
>
SED05NV0;TD7+
<
Note that DA0 (
Destination Address 0
) must be defined so that the
Event Message
can be routed to any IP address(es) and/or SMS(s)
receiver(s).
If the message were not to be routed, the
Event Definition
message
should be:
>
SED05SV0;TD7+
<
The only purpose of this event is to drive the
E05
signal true or false
according to the event’s trigger (TD7+) in order to trigger any other
event(s) that include
E05
as part of its trigger definition.
Send an
Event Message
when the button is pressed once:
Example:
Location Report
>
SED31NV0;P00+
<
A GPS time and position report will be generated by a single press
of the button. This example will use
Event Message
31.
Have the unit initiate a time counter, set an user signal true and
Example:
Several actions
per event
reset a distance counter whenever the main power source is switched
ON:
>
SED35SV0;F13+;ACT=SGC05TC;ACT=SSSU041;ACT=SGC07U
<
Refer to the
Scenarios and examples
chapter for more information.
127
