3
Assisted Configuration
An assisted configuration is performed with the free software tool
e-
track Configuration Assistant
provided by
Digital Communications
Technologies
TM
. This tool allows to set a complete configuration that
fits most users’ needs. However, advanced users can also perform a
Manual Configuration
which is described on the next chapter.
Man-
ual Configuration
can be performed with the free software tool
TAIP
Downloader
provided by
Digital Communications Technologies
TM
or
it can also be performed with any serial port terminal software like
Windows Hyperterminal.
3.1
Installing
e-track Configuration Assistant
can be found in the CD shipped with
e-track
TM
. After installation, the software can be found on Windows’
Program Folder at Start, All Programs,
e-track Configuration Assis-
tant
.
Make sure of installing
e-track
TM
’s
USB Windows’ Driver before
connecting the unit, or opening
e-track Configuration Assistant
.
For instructions on the driver, see the
Communicating with the
unit
section of the
Operation
chapter.
e-track Configuration As-
sistant
will not be able to communicate with
e-track Configuration
Assistant
if those steps are not followed first.
Warning:
e-track Configuration Assistant
requires The Java Virtual Machine
Software. It is very usual to have this software already installed on
a Windows Machine. If you don’t have it you can download it freely
from
.
This software can also be found on
e-track
TM
’s
CD.
e-track Configuration Assistant
and the driver can also be down-
loaded from
http://digitalcomtech.com/support.html
or requested at