S-Cutter
15
3. Pipe setting
3-1. S-LT Series_VS : Height adjustment of the Pipe
1) If the pipe is long, extend a vise support device(S-LT Series_VS) mounted at the back
of the table with aligning to pipe length as shown in the figure.
2) A standard table(S-LT Series_MT) is applicable to a maximum pipe length of 4m;
If the pipe length is 6m, use one or more auxiliary supports as indicated in the figure.
3) A standard table(S-LT Series_MT) is designed for lightweight load;
Therefore, one or more auxiliary supports fabricated on the site should be used when
it is applied to heavy pipes.
4) Adjust the scale on the pole of the S-LT Series_VS to the top part of the machine
table, as shown in the figure, according to the size of a pipe to be processed.
Auxiliary
support
Summary of Contents for S LT Series
Page 28: ...S 100LT S 150LT S 200LT...
